A pre-owned Siemens TM-P15C23-A0 / 6ES7193-4CD30-0AA0 ET200S Terminal Module.

Pulled from a panel, tested and working according to specification.

In excellent condition.

Features:

• Compatibility: Siemens ET 200S distributed I/O system
• Module Width: 15 mm
• Terminal Type: Spring-type terminals (Cage Clamp)
• Terminal Connections: 2 × 3

Documents

• Datasheet

For full specifications, view the official Siemens documentation.

The post Siemens TM-P15C23-A0 / 6ES7193-4CD30-0AA0 ET200S Terminal Module (Pre-Owned) appeared first on Control Hub.

A pre-owned Siemens 6ES7 138 4CA01 0AA0 ET200S Power Module PM-E 24V DC

Pulled from a panel, tested and working according to specification.

In excellent condition.

Features:

• Application: Power module for ET 200S distributed I/O systems
• Supply Voltage: 24 V DC
• Input Current (No Load): Max. 4 mA
• Current Carrying Capacity: 10 A (up to 60°C)
• Power Loss: Typical 0.1 W
• Short-Circuit Protection: External protection required (C-curve circuit breaker)
• Reverse Polarity Protection: Yes
• Diagnostics: Missing load voltage detection
• Diagnostic LEDs:
  • PWR (Green): Load voltage status
  • SF (Red): Group fault indication
• Configurable Parameter: Missing load voltage diagnostics (Enable/Disable)
• Electrical Isolation: Yes (between load voltage and backplane bus)
• Isolation Test Voltage: 500 V DC
• Mounting Compatibility: Siemens ET 200S distributed I/O system
• Dimensions (W × H × D): 15 × 81 × 52 mm
• Approvals: FM, CCC-Ex, NK (Nippon Kaiji Kyokai), CCS (China Classification Society)
• RoHS Compliance: China RoHS
• Product Status: Spare part / Discontinued by Siemens (since October 2023)

Documents

• Datasheet

For full specifications, view the official Siemens documentation.

The post Siemens 6ES7 138 4CA01 0AA0 ET200S Power Module PM-E 24V DC (Pre-Owned) appeared first on Control Hub.

A pre-owned Siemens 6ES7 132 4BD00 0AA0 Digital electronic module 4DO DC24V/0.5A HF.

Pulled from a panel, tested and working according to specification.

In excellent condition.

Typically used for soleniod valves, DC contactors, and indicator lights.

Features:

• Digital electronic module with four outputs
• Output current 0.5 A per output
• Rated load voltage 24 VDC
• Diagnostics: short-circuit
• Short-circuit protection
• Extended temperature range from 0 to 55 °C with vertical installation

Peculiarity notice from Supplier:

When you connect the 24 VDC rated load voltage to the power module by means of a
mechanical contact, the digital outputs feed the “1” signal for approximately 50 μs,
depending on the circuit. You need to take this into account if you connect the module to fast
counters

Documents

• Datasheet

For full specifications, view the official Siemens documentation.

The post Siemens 6ES7 132 4BD00 0AA0 Digital electronic module 4DO DC24V/0.5A HF (Pre-Owned) appeared first on Control Hub.

A pre-owned Siemens TM-E15C26-A1 / 6ES7193-4CA50-0AA0 Universal terminal module.

Pulled from a panel, tested and working according to specification. Previously used for Digital I/O modules such as 6ES7193-4CA30-0AA0.

In excellent condition.

Features:

• Compatibility: ET 200S Electronic Modules (15 mm Width)
• Terminal Type: Spring-Type (Cage Clamp) Terminals
• Terminal Connections: 2 × 6 Terminal Connections
• Auxiliary Connection: AUX1 Terminal Access with Continuous AUX1
• Installation: DIN Rail Mounted (ET 200S System)

Documents

• Datasheet

For full specifications, view the official Siemens documentation.

The post Siemens TM-E15C26-A1 / 6ES7193-4CA50-0AA0 Universal terminal module (Pre-Owned) appeared first on Control Hub.

A pre-owned Siemens 6ES7 132 4BF00 0AA0 ET 200S distributed I/O Digital electronic module 8DO DC24V/0.5 A.

Pulled from a panel, tested and working according to specification.

In excellent condition.

Features:

• Digital electronic module with eight outputs
• Output current 0.5 A per output, total current 4 A
• Rated load voltage 24 V DC
• Short-circuit protection
• Suitable for solenoid valves, DC contactors, and indicator lights
• Supports isochronous operation

Documents

• Datasheet

For full specifications, view the official Siemens documentation.

The post Siemens 6ES7 132 4BF00 0AA0 ET Digital electronic module 8DO DC24V/0.5 A (Pre-Owned) appeared first on Control Hub.

A pre-owned Siemens 6ES7193-4CA30-0AA0 SIMATIC ET 200S TM-E15C24-A1 Terminal Module.

Pulled from a panel, working according to specification. Previously used to connect Siemens digital electronic I/O modules such as 6ES7132-4BD00-0AA0.

In excellent condition.

Features:

• Compatibility: ET 200S Electronic Modules (15 mm Width)
• Terminal Type: Spring-Type Terminals
• Terminal Connections: 2 × 4 Terminal Connections
• Auxiliary Connection: AUX1 Terminal Access with Continuous AUX1

Documents

• Datasheet

For full specifications, view the official Siemens documentation.

The post Siemens 6ES7193-4CA30-0AA0 SIMATIC ET 200S TM-E15C24-A1 Terminal Module (Pre-Owned) appeared first on Control Hub.

A pre-owned Siemens 3RV1021-1KA15 Motor Protection Circuit Breaker.

Pulled from a panel, tested and working according to specification.

In excellent condition.

Features:

• Overload protection class: Class 10
• Adjustable current range: 9–12.5 A
• Breaking Capacity: 163 A
• Terminal type: Screw terminal
• Switching capacity: Standard switching capacity
• Auxiliary contacts: 1 NO + 1 NC transverse auxiliary switch
• Breaking capacity limit short-circuit current (Icu) at 400 V: 100 kA
• Breaking capacity limit short-circuit current (Icu) at 500 V: 42 kA
• Breaking capacity limit short-circuit current (Icu) at 690 V: 6 kA

Documents

• Datasheet

For full specifications, view the official Siemens documentation.

The post Siemens 3RV1021-1KA15 Motor Protection Circuit Breaker (9–12.5A, S0) (Pre-Owned) appeared first on Control Hub.

A pre-owned Siemens 3RH1131-1BB40 24 V DC Contactor Relay.

Pulled from a panel, tested and working according to specification.

In excellent condition.

Features:

• Part Number: 3RH1131-1BB40
• Coil Voltage: 24 V DC
• Contact Configuration: 3 × Normally Open (3 NO) + 1 × Normally Closed (1 NC)
• Maximum Operating Current: 10 A
• Mounting: Screw or 35 mm DIN rail mounting
• Ingress Protection (IP rating): IP20
• Operating Temperature: -25°C to +60°C

Documents

• Datasheet

For full specifications, view the official Siemens documentation.

The post Siemens 3RH1131-1BB40 24 V DC Contactor Relay (3NO + 1NC) (Pre-Owned) appeared first on Control Hub.

A pre-owned Siemens 3RT1015-1BB41 AC Contactor.

Pulled from a panel, tested and working according to specification.

In excellent condition

Notes: the plastic housing has scratches or cracks based on the secondhand model bought.

Features:

• Product Type: Power Contactor
• Manufacturer: Siemens
• Part Number: 3RT1015-1BB41
• Motor Rating: 3 kW @ 400 V AC
• Rated Operational Current: 7 A (AC-3)
• Coil Voltage: 24 V DC
• Number of Poles: 3-Pole
• Main Contacts: 3 × Normally Open (3 NO)
• Auxiliary Contacts: 1 × Normally Open (1 NO)
• Mounting: Screw or 35 mm DIN rail mounting
• Ingress Protection (IP Rating): IP20
• Operating Temperature: -25°C to +60°C

Documents

• Datasheet

For full specifications, view the official Siemens documentation

The post Siemens 3RT1015-1BB41 AC Contactor appeared first on Control Hub.

A pre-owned Siemens SINAMICS G120 BASIC OPERATOR PANEL BOP-2 (6SL3255-0AA00-4CA1).

Pulled from a panel and other functioning SINAMICS Control Unit CU240E-2 PN cpu units.

Working and in good condition. The display protective film has minor surface scratches and slight damage, visible but does not affect functionality. All display functions operate normally.

Features:

• Display: LCD, monochrome
• Operating temperature: 0 to 50 °C (32 to 122 °F)
• Storage temperature: -40 to 70 °C (-40 to 158 °F)
• Transport temperature: -40 to 70 °C (-40 to 158 °F)
• Max relative humidity: 95% (at 25 °C)
• Ingress protection (IP Rating): IP55
• Previously Interfaced: Interfaced to a SINAMICS Control Unit CU240E-2 PN

Documents

• Datasheet
• Manual

For full specifications, view the official Siemens documentations.

The post Siemens SINAMICS G120 BASIC OPERATOR PANEL BOP-2 6SL3255 0AA00 4CA1 (Pre-Owned) appeared first on Control Hub.